To reduce your daily water consumption without greatly changing your habits, you can equip yourself with a water saver. Inexpensive, this accessory can quickly become profitable: here is how to choose it well.
Cheap and easy to install, the water saver is a perfect way to easily lower your water bill. As a bonus, the arrival of this small device in your daily life saves you from having to change your habits: there is therefore no reason to do without it. Here is everything you need to know about the water savers that are increasingly popular on the market.
What is a water saver?
The water saver is a small accessory that is either placed in the spout of your tap or completely replaces it. Its purpose is to reduce the flow of water that flows when you turn on the tap. When you run the water, you don’t necessarily realize it at first.eyeeye naked, but the flow is less important: try to fill a pan, and you will quickly find that it takes you longer than before to achieve your ends.
This is explained by the fact that the water saver incorporatesairair flowing water: it applies the venturi effect, which reduces the flow while maintaining the pressionpression. This is also why the water saver is regularly called “aerator”, or even “aerator”. Different names that correspond to the same product.
What are the benefits of having a water saver?
The main advantage of the water saver is that it allows you to consume less! You can wash your hands or do your dishes with the same pressure, but using up to 50% less water each time. Admittedly, the tap is not the only way to consume water on a daily basis, but it still constitutes a significant saving, which logically translates into a reduction in the amount of your bill.
The other advantage is that the installation of a water saver is very simple and quick: we detail the procedure a little further down. You don’t have to call in a professional and you can put the accessory in place yourself, in just a few minutes. Moreover, as it is an inexpensive device to purchase, you can acquire several to equip the kitchen, the bathroom or even the laundry roomlaundry roomand thus multiply the sources of water saving.
The only potential downside to the water saver is that in some installations that involve a boiler with gazgaz, the drop in flow may block the flow of hot water. The ideal is to buy a mousseur to do the test and see how your installation reacts, because this situation turns out to be very variable.
To install a water saver, simply unscrew the ring located at the spout of your tap. Generally, a mousseur is already present: you must remove it to replace it with your new model. Sometimes, it is then enough to screw the ring back on to complete the operation, but it also happens that a new ring is supplied with the water saver: when this is the case, you must then replace your old ring. In this kind of situation, a new gasket is usually supplied.
Once the different steps of the instructions have been followed, all you have to do is tighten the ring firmly and open the tap to make sure that everything is properly sealed. You can do the glass filling test before and after installing the aerator, to check the flow difference. The whole thing only takes a few minutes.
