Whether you want to improve IP address resolution times, bypass state censorship, or simply limit access to your browsing history by a third party, there is another solution than subscribing to a VPN: it is to modify the servers. DNS of your Internet connection in Windows settings.
TheDNS (Domain Name System) make the link between the address that you enter in your and the site’s IP address. By default, the used by a connection is managed by your ISP (Internet Service Provider). This generally allows good performance, but does not guarantee the . Since generally DNS calls are made “in the clear”, this means that your operator has access to all the addresses that you visit.
Changing DNS in Network Settings
Windows proposes to modify the DNS servers used by a network card, directly in the parameters of this device. To access it, right-click on theof your connection located on the taskbar, and select “Open network and Internet settings”.
In the “Status” section of the network and Internet settings, click on “Network and Sharing Center”.
Within your active networks, click on the name of your connection.
Ayour connection status is displayed. Click on the “Properties” button.
Select ”version 4 (TCP / IPv4) ”to configure a connection (general case).
Select “Internet Protocol Version 6 (TVP / IPv6)” if you are using this protocol.
Click on “Properties” to access the DNS configuration for the connection.
Check the box “Use the following DNS server address” and enter the two DNS addresses of the server of your choice.
Below is a list of the main public DNS servers and their addresses:
You can finalize the change of DNS servers using the “OK” button, then close the network settings windows previously opened. It is not necessary to restart the, the changes are taken into account immediately.
Editing DNS with Public DNS Server Tool
Although it does not present any difficulty, the procedure to access the DNS parameters is tedious. If you want to change them quickly or regularly, you can download and use the free Public DNS Server Tool, which directly integrates a list of DNS servers and offers to modify them for you in two clicks.
The interface of Public DNS Server Tool is easy to learn. First select from the drop-down menu the network card whose DNS settings you want to modify. Then choose a DNS server among those indicated in the list and validate by clicking on “Change”.
The change of DNS servers is immediately applied!
What you must remember
- To take advantage of an uncensored Internet or to choose the service provider to whom you wish to entrust your browsing history, you can change the DNS servers of your connections. Windows allows access to these settings at the edge of the Network and Sharing center where the little Public DNS Server Tool can modify them in a few clicks.